Call us now!Dip Nets
All harvesting nets have a sturdy stainless steel frame and a protection rod all round to protect against abrasion. Two types can be supplied: Square landing nets with frames of 35 – 40 – 50 or 60 cm or round landing nets with bows of 40 – 50 or 60 cm. The nets are available with 5 – 10 – 15 or 20 mm mesh.
The net depth of the round landing nets is 10 cm more than the diameter (Example: 50 cm net – net depth 60 cm). Replacement nets are also available. The yarn thickness is 0.6 mm (with 5 mm mesh size), 1.4 mm (with 10 and 15mm mesh size) and 2.1 mm (with 20 mm). These nets are very rigid, and have been tested extensively by fish farmers.
Technical Specifications
Operation of the lever allows for the control of the valve, from open, through the preferred jet strength (spray to concentrated jet) to closed. For continuous operation, the lever is locked open, with the clip.
The valves are extremely robust and durable, due to the high quality brass/ stainless steel construction. The cleaning pistols are suitable for a pressure up to 24 bar. The strong acid and alkali-resistant rubber casing protects against crushing, and is thermally-insulating. All common hose connections are compatible (the connection to all of the guns, is ½“ internal screw thread). 
For all portable machines and electric motors, it is recommended to use a motor protection device (400V 3 phase). The motor protection has a thermal magnetic protection function and protects the motor from overload and short circuit.
Each has an integral phase reverser. This motor protection device can be supplied in different types and various adjustment ranges. Type 30 has been equipped with a 16A CEE plug. Furthermore, the plug is available with additional open-phase protection (Type 31). If the phase sequence is wrong, the lamp on the plug will flash. Type 33 has no plug fitted. This type allows the connection of a country-specific plug, ensuring motor protection regardless of country of use.