fbpx
Play
Slider

Aeration

PRICE INCREASES FOR 2023

Unfortunately we have had to increase prices for the quality LINN range of aquaculture equipment for 2023. Due to global demand and shortages of some materials along with increased transport costs across Europe we have had to pass some of these costs along to our customers in order to maintain the efficient supply of this trusted range. Costs of plastics used in float and components manufacture have increased by over 30%, stainless steel and wiring costs have increased by over 20% and transport costs across Europe have increased by over 300% over the last 24 months. We have absorbed as much of this cost increase as possible but regretfully we have had to pass some of these costs onto you, our customers. Rest assured we make all efforts to continue to provide our usual efficient service and products at the best price possible for you.

Purchase price is just part of the equation so:

DON’T WASTE YOUR ENERGY CHOSING OTHER MAKES OF AERATOR

With recent increases in energy costs fishery owners must consider running costs as well as purchase prices. LINN aerators are amongst the most efficient in the business.

Using the official figures from the manufacturer a LINN Aquawheel 0.55kw 230volt aerator will delivery efficient aeration and downstream water movement in the active zone of at least 70m. Cheaper paddlewheel aerators produce less output from a 1.5kw 230volt machine and an active zone of only 50m.

Average energy prices are around 34pence per kWh and due to increase. Running a cheaper to buy paddlewheel 1.5kw aerator for 6 hours per day for 6 months of the year will cost around £577 per year. A LINN Aquawheel aerator running for the same period with greater output will cost £204, a saving of £373 per year. LINN Aquawheels have been known to be still running after 30 years but even after 10 years of use the potential energy saving of at least £3730. LINN motors generally have a higher motor factor, therefore more efficient and the price of electricity is unlikely to fall making the savings even greater.

Visit the Case Studies and Testimonials pages to see examples of Linn aerators in action.

ENQUIRE NOW

PRODUCT RANGE

Aqua pilz aerator

Aqua Pilz

The Aqua-Pilz aerator agitates the whole body of the water by means of large-scale circulation and a wide, mushroom shaped fountain. The floating Aqua-Pilz aerators discharge the water upwards, as a fountain does, and in so doing create an attractive water feature.

Spec | Video | PDF

ENQUIRE
Submerged Aqua Pilz aerator

Aqua Pilz

with submerged motor

The Aqua-Pilz submersible aerator also produces an attractive mushroom shaped fountain but can also be used to reduce ice cover during the winter. The submerged motor also reduces operational sound important if you have nearby properties or cabins

Spec | Video | PDF

ENQUIRE
Lake and pond aeration

 Aqua Wheel 

The Aqua-Wheel paddle-wheel aerators work by greatly increasing the surface area of the water, giving an excellent exchange of gases between the air and water. Millions of tiny water droplets are thrown into the air allowing enough time for them to take up oxygen and remove polluting gases, such as carbon dioxide and hydrogen sulphide from the water. The Aquawheel also provides directional water flow circulating the aerated water, especially important for larger water bodies or linear lakes or those with islands. Aqua-Wheel requires almost no maintenance. The paddle wheels turn slowly, and are only slightly submerged in the water, so in most cases a protective screen is not required.

Aquawheel aerator model 1

Model 1 (0.2kW)

Spec | Video | PDF

ENQUIRE

Aquawheel aerator model 2

Model 2 (0.37kW)

Spec | Video | PDF

ENQUIRE

Aquawheel aerator model 3

Model 3 (0.55kW)

Spec | Video | PDF

ENQUIRE

Aquawheel aerator model 4

Model 4 (1.1kW)

Spec | Video | PDF

ENQUIRE

Aquawheel aerator for lakes and ponds

 Aqua Wheel 

With brushes

For fish stocking densities over 50kgs per cubic metre for fry or fingerling production, we also can deliver our proven aerator Aqua-Wheel in two sizes fitted with our brush wheels as an alternative to the paddle wheels. The flexible brush wheels result in a good intermixing and achieve a better and higher flow in the pond than the bladed wheels. But the oxygen input is slightly lower.

By installing the brush wheels, AquaWheel can also be used in cases of very dense fish stock or in ponds holding young or brood fish. Damage to the fish caused by paddle blades is avoided with the flexible brushes. In addition, floating debris cannot damage the brushes, and blockage is virtually impossible.

Spec | Video | PDF

ENQUIRE

Aqua mini submersed aerator

Aqua Mini

Aqua-Mini has a small, adjust able submersible motor. Because of the infinitely variable speed controller the power of the aerator can be adjusted optimally and tuned in to the size of the pond giving cost-effective continuous operation. Aqua-Mini is delivered ready for use with 10 m of cable and speed controller.

Spec | Video | PDF

ENQUIRE
Aqua max submersed aerator

Aqua Max

Aqua-Maxi has a robust stainless steel submersible motor and achieves great water circulation with low use of energy. The fountain pattern is created by a specially designed conical deflector achieving excellent aeration and a good current away from the machine, avoiding ‘short-circuiting’.

Spec | Video | PDF

ENQUIRE
Aqua hobby aerator for ponds

Aqua Hobby

Aqua-Hobby has an encapsulated motor, which is fixed in an aluminium protective casing onto the float above the water surface. It is virtually silent in operation. The water fountain automatically cools the motor. Aqua-Hobby is suitable for ponds up to a maximum of 200 square metres.

Spec | Video | PDF

ENQUIRE
Aerator solutions for fish farmers

Aqua jet aerator

Aqua Jet

Aqua-Jet is very easy to deploy and install. Suspended from a float it is responsive to fluctuating water levels only requiring to be anchored or moored to stop it drifting away. The robust submersible pump generates a powerful flow with excellent oxygen transfer. This water circulation strips waste gases from the water, including carbon dioxide, and thus discourages algal formation. The angle of discharge (trajectory) of the water jet is adjustable according to the desired flow, size of the pond and stock of fish.

Spec | Video | PDF

ENQUIRE

Turbo jet aerator

Turbo Jet

with submerged motor

Turbo-Jet operates silently below the water surface, its directly driven propeller produces an enormous water circulation with relatively low energy-consumption. The special action of the high-speed motorised impeller draws in air, breaking it into thousands of small bubbles. The special water/air bubble jet is directed down into the water at an angle and mixes the whole volume and prevents the formation of dead spots.

Spec | Video | PDF

ENQUIRE

Linn logo

Please provide details to receive our Linn Aqua Technology brochure:

Call us now!

  • Aqua Pilz

    Aqua Plitz for lake and pond aerationThe Aqua-Pilz aerator agitates the whole body of the water by means of large-scale circulation and a wide, mushroomshaped fountain. Harmful gases are expelled as a result of circulating the water. The ripples that are created disturb the surface of the water with the result that there is no heavy formation of algae.

    The floating Aqua-Pilz aerators discharge the water upwards, as a fountain does, and in so doing create an attractive water feature. The water is stimulated and circulated with a propeller. The angle of trajectory of the spray and the impact on the water surface enhances the exchange of gases with the atmosphere. The gas filtration and oxygenation is unequalled, resulting in a healthy fish population.

    The angle of expulsion has been chosen so that waves move outwards from the aerator, distributing the aerated water throughout the pond. Stagnant, oxygen poor zones are thus avoided.

    This flow of water away from the apparatus also ensures that the aerator always draws water low in oxygen from below, circulates it and enriches it with oxygen. A short-circuit flow is avoided by the angle of expulsion. Aqua-Pilz comes in two designs: with a surface motor and with a submersible motor. Both types are almost identical in terms of performance, oxygen enrichment and power consumption.

    The submersible-motor design produces a lower and rather broader fountain of water, while the fountain from the surface-based-motor version is rather higher but more narrow. Only the submersible motor version is suitable for use during winter (to reduce the formation of ice for example). Both types of Aqua-Pilz are, of course, designed for continuous operation. The aerators are supplied ready for use and come with cable and motor-protection device. All screen baskets, fittings, motor shafts and screws are made from rust-resistant materials.

    The high-performance electric motor in this type of aerator is housed, with its long stainless-steel shaft, in a polyethylene cover on the float above the surface of the water.

    From the outside the isolated motor operates silently, and only the murmur of the stimulated water can be heard. A large rust-proof inlet excludes fish and debris from the pump chamber. The screen basket is avail able in a variety of mesh sizes.

    We have been producing Aqua-Pilz aerators for more than 30 years. This aerator has proven itself a thousand times over and ensures durability!

    Technical Specifications

    Aqua Plitz technical info

    Advantages

    • Best possible oxygen-enrichment
    • Minimum energy consumption
    • Robust motors
    • Easy to install
    • Lightweight and readily portable
    • High quality materials

    download pdf

  • Aqua Pilz – with submerged motor

    Aqua Plitz submerged for reduced noiseThe Aqua-Pilz aerator agitates the whole body of the water by means of large-scale circulation and a wide, mushroom shaped fountain. Harmful gases are expelled as a result of circulating the water. The ripples that are created disturb the surface of the water with the result that there is no heavy formation of algae.

    The floating Aqua-Pilz aerators discharge the water upwards, as a fountain does, and in so doing create an attractive water feature. The water is stimulated and circulated with a propeller. The angle of trajectory of the spray and the impact on the water surface enhances the exchange of gases with the atmosphere. The gas filtration and oxygenation is unequalled, resulting in a healthy fish population.

    The angle of expulsion has been chosen so that waves move outwards from the aerator, distributing the aerated water throughout the pond. Stagnant, oxygen poor zones are thus avoided.

    This flow of water away from the apparatus also ensures that the aerator always draws water low in oxygen from below, circulates it and enriches it with oxygen. A short-circuit flow is avoided by the angle of expulsion. Aqua-Pilz comes in two designs: with a surface motor and with a submersible motor. Both types are almost identical in terms of performance, oxygen enrichment and power consumption.

    The submersible-motor design produces a lower and rather broader fountain of water, while the fountain from the surface-based-motor version is rather higher but more narrow. Only the submersible motor version is suitable for use during winter (to reduce the formation of ice for example). Both types of Aqua-Pilz are, of course, designed for continuous operation. The aerators are supplied ready for use and come with cable and motor-protection device. All screen baskets, fittings, motor shafts and screws are made from rust-resistant materials.

    The high-performance electric motor in this type of aerator is housed, with its long stainless-steel shaft, in a polyethylene cover on the float above the surface of the water.

    From the outside the isolated motor operates silently, and only the murmur of the stimulated water can be heard. A large rust-proof inlet excludes fish and debris from the pump chamber. The screen basket is avail able in a variety of mesh sizes.

    We have been producing Aqua-Pilz aerators for more than 30 years. This aerator has proven itself a thousand times over and ensures durability!

    Technical Specifications

    Aqua Plitz submerged technical info

    Advantages

    • Best possible oxygen-enrichment
    • Minimum energy consumption
    • Robust motors
    • Easy to install
    • Lightweight and readily portable
    • High quality materials

    download pdf

  • Aqua Wheel – Model 1, 0.25 kW

    Model 1 - Surface aerationThe Aqua-Wheel aerator is available in a variety of sizes to suit individual requirements. Common to all sizes is the exceptionally buoyant float. With Aqua-Wheel, we have made ease of use a priority. Aqua-Wheel is relatively lightweight, so making it easy to install in the desired position.

    Practical carrying handles are moulded directly onto the sides of the float. Fastening and anchoring could not be easier. This can be achieved either by means of a fastening rope in the form of a V, or by a single rope attachment, or even by a locking mechanism on rods. This allows for assembly and dismantling on your pond.

    Materials

    Aqua-Wheel is driven with a high quality, slow running electric motor (IP55). The motor is mounted above the water surface. Power from the motor is transmitted by a simple tooth belt drive (except the 0.25 kW, where a gear motor is used). This results in reliable operation, long life and minimal energy consumption. The wheels are connected to a one-piece stainless steel shaft held by sealed ball-bearings. For the mountings, shafts and screws, only stainless steel is used. The float and the motor cover are made of robust, UV-resistant polyethylene.

    The paddle wheel has been specially developed for aeration function, maximising both the transfer of oxygen, and the dispersal of waste gases. The shape of the wheel and the paddles guarantee optimum water circulation and distribution with minimum power requirements. Its design creates a powerful current, making this aerator especially valuable where flow is required. The paddles are robust and durable, and can be replaced quickly and easily. Aqua-Wheel is supplied ready to use, complete with cable and motor-protection-device.

    Technical Specifications

    Model 1 - technical info

    Advantages

    • Best possible oxygen-enrichment
    • best possible water-circulation
    • non-clogging
    • convenience and low maintenance
    • rating adjustable (size 0.55 kW)
    • ready for use
    • minimum energy-consumption

    Download pdf

  • Aqua Wheel – Model 2, 0.37 kW

    Model 2 - Surface aerationThe Aqua-Wheel aerator is available in a variety of sizes to suit individual requirements. Common to all sizes is the exceptionally buoyant float. With Aqua-Wheel, we have made ease of use a priority. Aqua-Wheel is relatively lightweight, so making it easy to install in the desired position.

    Practical carrying handles are moulded directly onto the sides of the float. Fastening and anchoring could not be easier. This can be achieved either by means of a fastening rope in the form of a V, or by a single rope attachment, or even by a locking mechanism on rods. This allows for assembly and dismantling on your pond.

    Materials

    Aqua-Wheel is driven with a high quality, slow running electric motor (IP55). The motor is mounted above the water surface. Power from the motor is transmitted by a simple tooth belt drive (except the 0.25 kW, where a gear motor is used). This results in reliable operation, long life and minimal energy consumption. The wheels are connected to a one-piece stainless steel shaft held by sealed ball-bearings. For the mountings, shafts and screws, only stainless steel is used. The float and the motor cover are made of robust, UV-resistant polyethylene.

    The paddle wheel has been specially developed for aeration function, maximising both the transfer of oxygen, and the dispersal of waste gases. The shape of the wheel and the paddles guarantee optimum water circulation and distribution with minimum power requirements. Its design creates a powerful current, making this aerator especially valuable where flow is required. The paddles are robust and durable, and can be replaced quickly and easily. Aqua-Wheel is supplied ready to use, complete with cable and motor-protection-device.

    Technical Specifications

    Model 1 technical info

    Advantages

    • Best possible oxygen-enrichment
    • best possible water-circulation
    • non-clogging
    • convenience and low maintenance
    • rating adjustable (size 0.55 kW)
    • ready for use
    • minimum energy-consumption

    Download pdf

  • Aqua Wheel – Model 3, 0.55 kW

    Model 3 - Surface aerationThe Aqua-Wheel aerator is available in a variety of sizes to suit individual requirements. Common to all sizes is the exceptionally buoyant float. With Aqua-Wheel, we have made ease of use a priority. Aqua-Wheel is relatively lightweight, so making it easy to install in the desired position.

    Practical carrying handles are moulded directly onto the sides of the float. Fastening and anchoring could not be easier. This can be achieved either by means of a fastening rope in the form of a V, or by a single rope attachment, or even by a locking mechanism on rods. This allows for assembly and dismantling on your pond.

    Materials

    Aqua-Wheel is driven with a high quality, slow running electric motor (IP55). The motor is mounted above the water surface. Power from the motor is transmitted by a simple tooth belt drive (except the 0.25 kW, where a gear motor is used). This results in reliable operation, long life and minimal energy consumption. The wheels are connected to a one-piece stainless steel shaft held by sealed ball-bearings. For the mountings, shafts and screws, only stainless steel is used. The float and the motor cover are made of robust, UV-resistant polyethylene.

    The paddle wheel has been specially developed for aeration function, maximising both the transfer of oxygen, and the dispersal of waste gases. The shape of the wheel and the paddles guarantee optimum water circulation and distribution with minimum power requirements. Its design creates a powerful current, making this aerator especially valuable where flow is required. The paddles are robust and durable, and can be replaced quickly and easily. Aqua-Wheel is supplied ready to use, complete with cable and motor-protection-device.

    Technical Specifications

    Model 3 technical spec

    Advantages

    • Best possible oxygen-enrichment
    • best possible water-circulation
    • non-clogging
    • convenience and low maintenance
    • rating adjustable (size 0.55 kW)
    • ready for use
    • minimum energy-consumption

    Download pdf

  • Aqua Wheel – Model 4, 1.1 kW

    Model 4 - Surface aerationThe Aqua-Wheel aerator is available in a variety of sizes to suit individual requirements. Common to all sizes is the exceptionally buoyant float. With Aqua-Wheel, we have made ease of use a priority. Aqua-Wheel is relatively lightweight, so making it easy to install in the desired position.

    Practical carrying handles are moulded directly onto the sides of the float. Fastening and anchoring could not be easier. This can be achieved either by means of a fastening rope in the form of a V, or by a single rope attachment, or even by a locking mechanism on rods. This allows for assembly and dismantling on your pond.

    Materials

    Aqua-Wheel is driven with a high quality, slow running electric motor (IP55). The motor is mounted above the water surface. Power from the motor is transmitted by a simple tooth belt drive (except the 0.25 kW, where a gear motor is used). This results in reliable operation, long life and minimal energy consumption. The wheels are connected to a one-piece stainless steel shaft held by sealed ball-bearings. For the mountings, shafts and screws, only stainless steel is used. The float and the motor cover are made of robust, UV-resistant polyethylene.

    The paddle wheel has been specially developed for aeration function, maximising both the transfer of oxygen, and the dispersal of waste gases. The shape of the wheel and the paddles guarantee optimum water circulation and distribution with minimum power requirements. Its design creates a powerful current, making this aerator especially valuable where flow is required. The paddles are robust and durable, and can be replaced quickly and easily. Aqua-Wheel is supplied ready to use, complete with cable and motor-protection-device.

    Technical Specifications

    Model 4 technical info

    Advantages

    • Best possible oxygen-enrichment
    • best possible water-circulation
    • non-clogging
    • convenience and low maintenance
    • rating adjustable (size 0.55 kW)
    • ready for use
    • minimum energy-consumption

    Download pdf

  • Aqua Wheel – with Brush Wheels

    We also can deliver our proven aerator Aqua-Wheel in two sizes fitted with our brush wheels as an alternative to the paddle wheels. The flexible brush wheels result in a good intermixing and achieve a better and higher flow in the pond than the bladed wheels. But the oxygen input is slightly lower.

    By installing the brush wheels, Aqua-Wheel can also be used in cases of very dense fish stock or in ponds holding young or brood fish. Damage to the fish caused by paddle blades is avoided with the flexible brushes. In addition, floating debris cannot damage the brushes, and blockage is virtually impossible. This brush-wheel version is built the same way as the Aqua-Wheel with paddle wheels.

    It is very easy to convert your existing Aqua-Wheel to a brush wheel aerator (except the 0.37kW model with a ‘U’ float). It is simply necessary to remove the paddle wheels, and fit the brush wheels.

    Technical Specifications

    Advantages

    • flexible brush wheels
    • high flow
    • no fish damage
    • for use with dense, or young fish stocks

  • Aqua Mini

    Aqua Mini- ideal small scale aerationAqua-Mini is a floating Linn aerator that offer effective aeration but low power usage.They can be used in a wide range of applications, including fry ponds, cages, small and hobby ponds. With these aerators it is possible to support the growth of the fish and optimize the environment of the fish. The Aqua-Mini is lightweight and convenient to use!

    The aerators enrich the water with oxygen and expel waste gases (such as carbon dioxide). The water surface is broken by waves, thus inhibiting, or even preventing the growth of algae. In natural ponds, the circulation created prevents foul, oxygen deficient water. The water remains healthy. Healthy water makes healthy fish! In addition, all aerators offer a visually attractive fountain pattern. The range of sizes means that there is an ideal aerator for every size of pond ! So, no energy is wasted needlessly by having an oversized aerator!

    Aqua-Mini has a small, adjustable submersible motor. Because of the infinitely variable speed controller at the plug,* the power of the aerator can be adjusted optimally and tuned in to the size of the pond. This gives a particularly cost-effective and economical continuous operation. The intake screen (anodised aluminium) excludes plants and small fish and guarantees trouble-free operation. The screen basket is smooth, easy to clean and available with 2 or 6 mm slotted-holes.

    Aqua-Mini is delivered ready for use with 10 m of cable and speed controller. It is recommended for ponds of area up to a maximum of 20 square metres.

    Technical Specifications

    Aqua Mini technical info

    Advantages

    • proven in daily use
    • excellent oxygen enrichment
    • low power consumption
    • very reliable aerators
    • easy to transport and install
    • high quality

    Download pdf

  • Aqua Max

    Aqua Max - ideal for pond aerationAqua-Maxi has a robust stainless steel submersible motor. The pump achieves great water circulation with low use of energy. The fountain pattern is created by a specially designed conical deflector. This achieves excellent aeration and a good current away from the machine, avoiding ‘short-circuiting’.

    The float of the Aqua-Maxi has an integral, practical handle. The screen is stainless steel with a standard bar spacing distance of 9.5 mm, with 5.5 mm available to order.

    For an extra charge, the Aqua-Maxi can be supplied with a speed controller, which will enable the water delivery and capacity to be varied infinitely. Aqua-Maxi is known for its reliable pumping and its low susceptibility to clogging. This model is recommended for basins and natural ponds up to a maximum of 60 square metres.

    Technical Specifications

    Aqua Max technical info

    Advantages

    • proven in daily use
    • excellent oxygen enrichment
    • low power consumption
    • very reliable aerators
    • easy to transport and install
    • high quality

    Download pdf

  • Aqua Hobby

    Aqua Hobby - ideal small scale aerationAqua-Hobby has an encapsulated motor, which is fixed in an aluminium protective casing onto the float above the water surface. It is virtually silent in operation. The water fountain automatically cools the motor.

    Aqua-Hobby has a multitude of applications. This model offers very effective aeration at a relatively low price. The stainless steel screen basket (bar spacing 9.5 mm – also available with 5.5 or 18 mm spacing) of the Aqua-Hobby has a large surface area. It excludes large particles and fish from the pump chamber. Aqua-Hobby is suitable for ponds up to a maximum of 200 square metres (subject to stock levels).

    Aqua-Hobby with submersible motor

    The motor of this model hangs under the well-proven square float (as used for the Aqua-Hobby). The surface area of the screen (stainless steel screen basket, standard bar spacing 9.5 mm – also available with 5.5 mm bar spacing) has been considerably enlarged. This aerator is less prone to clogging, making it more reliable! The stainless steel submersible motor has been further developed and improved. The high-quality mechanical seal guarantees long-lasting durability, during continuous operation. Aqua-Hobby with submersible motor is ideal for operation during winter. It is visually unobtrusive, and espe cially suited to natural waters, as only a small part of the float can be seen when it is not operating.

    Aqua-Hobby with submersible motor is light and easy to move and deploy. This aera tor is suitable for ponds up to 200 square metres area (according to stock levels).

    Technical Specifications

    Aqua Hobby technical info

    Advantages

    • proven in daily use
    • excellent oxygen enrichment
    • low power consumption
    • very reliable aerators
    • easy to transport and install
    • high quality

    Download pdf

  • Aqua Jet

    Aqua Jet pond aerationAqua-Jet has a directable jet fountain, and creates a strong flow in the pond. Aqua-Jet is very easy to deploy and install. A fixed installation is unnecessary, as it is only required to anchor the aerator (using ropes or chains) to stop it drifting away (against the directional outlet).

    The robust submersible pump generates a powerful flow with excellent oxygen transfer. This water circulation strips waste gases from the water, including carbon dioxide, and thus dis courages algae. The angle of discharge (trajectory) of the water jet is adjustable according to the desired flow, size of the pond and stock of fish.

    The robust submersible motor has a uniquely designed mechanism that gives very high efficiency; low electrical consumption but high power output. The motor shaft is made of high-grade stainless steel, and twin impellers are directly mounted onto it. The arrangement of the axial flow impellers is virtually clog-free. A narrow screen option is avail able for use in fry ponds. The stainless submersible motor is always in the water and constantly cooled during use. This guarantees a long life and maintenance-free operation. Aqua-Jet is suitable for almost every relatively long pond (whether a canal or raceway) or large and square ponds.

    With the aerator suitably positioned, a good flow and thorough circulation of the water can soon be achieved. This is especially important to distribute the oxygenenriched water throughout the whole pond or lake. Otherwise, putrefaction can become established in stagnant and oxygen-deficient areas. This can result in the death of many different organisms (including fish), bad smells and the accelera tion of silt deposition.

    Aqua-Jet draws water from deep, and consequently draws up and circulates stagnant water. Aqua-Jet comes with a one-year warranty. Aqua-Jet with submersible motor gives good flow and high oxygen enrichment.

    Technical Specifications

    Aqua Jet technical info

    Advantages

    • directional water output
    • excellent oxygen enrichment
    • low power consumption
    • excellent circulation
    • robust and readily portable

    Download pdf

  • Turbo Jet with submerged motor

    Turbo Jet with submerged motor - pond aerationWater circulator with air diffuser for better water flow and more oxygen… Turbo-Jet enriches the water with oxygen and keeps it clean.

    Turbo-Jet operates silently below the water surface. The robust submersible motor with its directly driven propeller produces an enormous water circula tion with relatively low energy-consumption. The special action of the high-speed motorised impeller draws in air, breaking it into thousands of small bubbles. These fine bubbles are injected into and entrained in the water current where they have a long dwell time. This improves oxy genation of the water.

    The special water/air bubble jet is directed down into the water at an angle. This mixes the whole volume and prevents the formation of dead spots.

    Thus, vital oxygen is distributed around the water, benefitting fish and microbes alike.

    Despite this great circulation, Turbo-Jet is virtually silent in operation.

    Fish are protected from the impeller by a cage screen, which is effectively self cleaning in operation due to the powerful
    water flow along it.

    Turbo-Jet can easily be used even in winter when the powerful water circulation will hinder or reduce the formation of ice. In very low minus temperatures, the air supply can be interrupted.

    The motor housing is made from cast steel or stainless steel. Other materials used are stainless steel and polyethylene. Turbo-Jet – the flexible and economical water circulator and oxygenator.

    Technical Specifications

    Turbo Jet with submerged motor technical info

    Advantages

    • excellent circulation
    • good oxygen-enrichment
    • easy to transport and install
    • robust quality
    • works silently

    Download pdf

  • REQUEST A BROCHURE

    Please enter your details below to receive a brochure. We can send either a PDF or print copy for the product you choose

    Brochure required
    (LINN Aqua Technology):
    AeratorsFish Transport

    • Social media & sharing icons powered by UltimatelySocial